Analysis of the Electric Field and the Potential Distribution in Cavities Inside Solid Insulating Electrical MaterialsT. Seghir*,1, D. Mahi1,T. Lebey2, D. Malec2,1 Materials Laboratory, Electrical Engineering Institute, Amar Thelidji University of Laghouat Algeria2 Electrical Engineering Laboratory, University of Paul Sabatier, Toulouse France* PO BOX 37G, Laghouat (03000) Alge...

Design and Measurements on a Small Radial Flux PermanentMagnet Generator with Concentrated CoilsØystein Krøvel* and Robert NilssenDept. of Electric Power Engineering, NTNU, Trondheim*O. S. Bragstads Plass 2, 7034 Trondheim, Norway, oystein.krovel@elkraft.ntnu.no

Current Distribution in the Electrodes of Industrial Three-phase Electric Smelting FurnacesAuthor H. L. LarsenElkem AS ResearchP.O.Box 5211 MajorstuenNO-0303 Oslo, Norwayhilde-loken.larsen@elkem.no

Prediction of the Transmitted Light Through a Nano-Aperture of SNOM ProbesG. Louarn*, S. Taleb, and S. CuenotInstitut des Matériaux Jean Rouxel (IMN), CNRS UMR 6502*Corresponding author: 2 rue de la Houssinière, 44322 NANTES cedex 3, France, Guy.louarn@cnrs-imn.fr

Multiphysics Investigation of Thermo-optic Effect in Silicon-on-Insulator Waveguide ArraysFrancesca Magno, Francesco Dell’Olio and Vittorio M. N. Passaro*Photonics Research Group, Dipartimento di Elettrotecnica ed Elettronica, Politecnico di Barivia Edoardo Orabona n. 4, 70125 Bari, Italy, passaro@deemail.poliba.it

Design of Electro-Optic Bragg Amplitude ModulatorA. Secchi1,*,V. Foglietti1, E. Cianci1, L. Pierno2 , M. Dispenza21CNR-IFN,2SELEX-SI*Corresponding autor: e-mail: amsicora@ifn.cnr.it

Long Period Gratings in Photonic Crystal FibresJovana S. Petrovic*, Vladimir Mezentsev, Ian BennionPhotonics Research Group, Aston University, UK*J. Petrovic: Photonics Research Group, Aston University, Aston Street, Birmingham, B4 7ET, UK, petrovij@aston.ac.uk

Confinement and Bending Losses Computations in all Solid 2D Photonic Band-Gap FibersV. Pureur, G. Bouwmans, L. Bigot, M. Perrin, M. Douay, Y. QuiquempoisLaboratoire de Physique des Lasers, Atomes et Molécules, IRCICA, Université des Sciences et Technologies de Lille, Bâtiment P5, 59655 Villeneuve d’Ascq cedex, FranceVincent.Pureur@phlam.univ-lille1.fr

HAM Construction modeling using COMSOL with MatLabModeling Guide, version 1.0A.W.M. (Jos) van SchijndelEindhoven University of TechnologyEmail: A.W.M.v.Schijndel@bwk.tue.nlDate: 1 October 2006

Thermal Dissipation of DIMM Modulesin Tower-BTX ConfigurationG. Sorge, G. Cammarata, G. Petrone*Department of Industrial and Mechanical Engineering – University of CataniaViale Andrea Doria, 6 – 95125 Catania, Italy*Corresponding author: email: gpetrone@diim.unict.it , phone: +39 095 738 2452

Thermal and Velocity Field Analysis Inside an HistoricalBuilding - The Hall of Two Hundred Case StudyCarla Balocco*Energy Engineering Department, via Santa Marta 3 , 50139 Firenze - Italy*Corresponding author: Energy Engineering Department, via Santa Marta 3 , 50139 Firenze - Italyemail: carla.balocco@unifi.it

A FEM Analysis of Transport Phenomena Occurring DuringVegetables DryingS. Curcio11Department of Chemical Engineering and Materials – University of Calabria*Corresponding author: Ponte P. Bucci – cubo 45/a – 87030 Rende (CS) – ITALY.E-mail: stefano.curcio@unical.it

Modelling of the heating-up of pre-ionized gases with short laser pulsesusing Comsol MultiphysicsStephan Wieneke, Stephan Brückner and Wolfgang ViölUniversity of Applied Sciences and ArtsVon-Ossietzky-Str. 9937085 Göttingen / Germanywieneke@hawk-hhg.de

Lars G.Westerberg · Hans O. °Akerstedt2D solutions to the compressible solar wind flow near areconnection site at the dayside magnetopause

Using COMSOL Multiphysics to Modelling High Pressure Discharge LampsJ-B. Rouffet, S. Bhosle, G. Zissis, R. RuscassiéCentre de Physique des Plasmas et Applications ToulouseUniversité Paul Sabatier, 118 route de Narbonne, 31062 Toulouse

Frédéric RogerAnalysis of magnetohydrodynamics GTAW arc behavior

Using a Linux Cluster for Parallel Simulations of an ActiveMagnetic Regenerator RefrigeratorT. F. Petersen*, 1, N. Pryds1 and A. Smith11Risø National Laboratory, Fuel Cells and Solid State Chemistry Department, Frederiksborgvej399, P.O. Box 45, DK-4000 Roskilde, Denmark*Corresponding author: email:thomas.frank.petersen@risoe.dk

Numerical Simulation of Induction Stirred LadleM Pal*1, S Kholmatov and P Jönsson1Civil and Computational Engineering Centre-University of Wales, Swansea,Division of metallurgy, Material Science and Engrineering, KTHSE-10044 Stockholm, Sweden*Corresponding author: mayur@kth.se

Mayur Pal, Robert Eriksson and Pär JönssonA Computational Fluid Dynamics model of a 20Kg Inductionstirred laboratory scaled ladle

E. Okoth Ogur, V. Goodship, and G. F. SmithSimulation of Magnetic Injection Moulding